Skip to content
SACO Display Director

Display Control

Visual Settings for Selected Displays:

The left-side list shows every display defined in the project. Selecting a display makes it the active display for the Settings and LED Image Booster panels below.

  • Save: Next to the selected display, saves its current configuration. Only enabled for the display currently selected.
  • Save All Displays: Saves the current configuration to every display in the project.
  • Reset Config: Next to the selected display, resets its configuration back to its last saved/uploaded state.

Settings

  • Brightness: Adjusts the overall light output of the display, affecting how bright or dark the image appears.
  • Gamma: Defines the relationship between the input signal and the brightness of the output, influencing the midtones and contrast of the image for more accurate color representation.

LED Image Booster

  • Color Standard: Defines the color space or standard used for color reproduction, such as sRGB, Adobe RGB, or DCI-P3
  • Color Standard Temperature: Specifies the temperature of the color white, measured in Kelvin (K), influencing the warmth or coolness of the displayed image.

Display Mode

  • Video: To display real-time video content, allowing dynamic visual playback.
  • Freeze: To pause the current display, capturing the last frame shown on the screen.
  • Test Patterns: To show predefined test patterns for calibration and diagnostics, helping to evaluate color accuracy, brightness, and other display settings.